Second Project: WINDOWS

This old house had been updated with furnace and CENTRAL AIR CONDITIONING. So nice in sunny southern California! ....but.... they calked, sealed (sometimes with nails) and painted ALL windows shut.

Seriously? I do like to open a window or two in the breezy evenings.

So I tackled the windows. Most were double hung with pulley and cast iron weights, the rest were casement windows.

These are from the dining room. There were 3 sets of double hung. The ropes had been cut but the weights were still inside the frame.

Many layers of paint and a lot of damaged frames. I only broke one plate of glass and rather than spend $35 to have one reglazed I googled and did it myself. Thank you YouTube.

These are from a bedroom and an example of their condition. Total are were 18 sets of casement windows to be opened and refinished.

I took the hinges off, soaked in crockpot, and spray painted. 

They were beyond polishing up.  

Sun Room ReDo

This project was kick-started when my AWESOME BROTHER WAYNE found a great deal on a printer for me but alas, it wouldn't fit on the shelf.

 I didn't want that shelf there anyway so until we find the right cabinet it will go on a table. Now while we're at it, I've wanted the divider shutters re-mounted from the sun room side to the family room side of the frames to get them out of the way.

There are folded back tri-fold shutters that I had added to the side frames a few years ago. 

Enter my AWESOME BROTHER WAYNE..

Mounting the shutters on the other side of the old window frames.

But now I have to paint.....

As seen through the DARK family room. This 'room' was enclosed years prior from an outside patio area.

I believe the family room was originally the dining room with french doors to the outside patio.

They took out the windows and doors and left the frames. 

Notice the low ceiling.

Shutters are now on the family room side.

View from the 'now' dining area (formerly a kitchen nook?)

Pictures in process of paint. Such a nice sunny room, Yes I had to unstick all 3 single-hung windows.

My first DIY project started in the kitchen.

When we moved into the 1921 California Bungalow it seemed that the previous owner gave up when it came to the kitchen. It was 'primed' in a flat pinkish-beige paint color that even clashed with the old 'oatmeal' counter tile.

I ignored that room for several years thinking I would save up for a complete renovation. But alas, the economy intervened. What really grated on me was the kitchen drawers that slid wood against wood and shredded sawdust into the cabinets below. I decided to install drawer slides.

 None of the drawers were the same depth, it seems they just added new storage as they needed.
I had to use old lumber pieces to build up the back of the wall. Is anything ever as easy as it is in your mind?

I got all the bottom/center drawer glides on the 7 drawers...
But wait, since I have this started, I should just throw a coat of paint on until I can completely renovate.

Lets take all the cupboard doors off to paint.

 Um.... am I supposed to do this in stages? Like take a few off, work on the hardware, sand, and paint then process a few or... (do it the way I did and) take them all off at once.

A little awkward placement of cupboards, oh well.

 

I did use this opportunity to thin out my many dishes and etc. that haven't been used in a long time.

 My cute dog was taking advantage and looking for any unsecured snacks. I hope it wasn't vermine she was detecting...
You can see the crock-pot cooking the hardware for re-use.

 I couldn't not take the pantry door off could I? It wouldn't shut properly.

 I counted 4 colors that had been painted over the hinges. No wonder the door wouldn't close.

 I had an unfortunate overflow in the bathroom upstairs. Luckily it was a one time event and dried up quickly with little damage but I couldn't leave that.

Hmmmm, I really don't like that light fixture either. Fake oak frame with fluorescent lights....

 OK now I can't just ignore the back porch/laundry room since it's so visible from the kitchen. 

You see the pinkish flat primer paint. Nice.

 The original back door from the kitchen. They just left the kitchen window above the sink when they added a laundry room and small powder room in the 40's.

 This is the wiring  coming out of the ceiling when I took the light down. Hmmm

Let's set up a paint station in the dining room. I do have that nice clear self sticking wrap on the hardware floor.


I have a little bit of perfectionist (anal) gene and can't just paint over the hinges like 5 previous painters have done so I'll need to take the hinges off.

This is what I encountered...

Since I'm cheap thrifty and want to save money where I can to spend on the fun things, I stripped all the layers of paint off all the hinges. I put them in a crock-pot with dish-soap and cooked it off. Then cleaned each one with scrapers, nail points and whatever I had on hand. I even cleaned the screws.

Here are some pictures of progress before you think me insane.

Yeh, let's not empty all the cupboards, Whew! 

Note to self: paint the insides later.

The back door is in the Laundry Room so that was included. 

Did I mention this house has settled and withstood several earthquakes.

Do I mount curtains level or inline with windows? Level doesn't look right.

What a mess and easy catch-all 

At some point in this houses life they added the laundry room onto the back of the house.

...and left the window....

The original laundry area was located outside. This is much more convenient.

I did finish this project in a timely manner
I just didn't update this Blog. Here are some AFTER pictures.

The pictures along the ceiling are actual 'crate labels' from my town of Covina

The 'JELLO' advertisement picture commemorates my home state of UTAH's national fruit. LOL

Two finished pictures of the laundry area. I'll search for more.

I found another

I've since done some tweaking. I added a Shelf above the doorway to the dining room and some shelves the the end of the cupboard.

A little chalk-board paint to the pantry door looks nice too.

I refurbished and rewired an authentic 1920's light fixture.

My DIY kitchen island to replace that cute ineffective wicker table.

I got a thrift store shiny white desk and had my awesome brother mount it on plywood with wheels. He also added a shelf where the knee hole was. 

I painted it in 'Fusion mineral paint' 'Liberty'

but what to do with the top? Paint is not practical. 

Should I buy a slab of granite? Ugh (did I mention I'm cheap?) 

Oh my awesome brother also added some bead board to the ugly rough back. I hadn't decided what to do with that shelf either.

After googling and Youtubing, 

I bought a small granite kit from https://gianigranite.com 

in 'SLATE'

This is actually made to refinish counter-tops. 

I may do my old tile top later it was soooo easy.

Here's the base coat. 

The kit includes everything but guts.

The base is rolled on then after drying for a couple hours

step two.

a better peak at the bead board on the back.

3 colors sponged on to your liking 

Kind of pretty 

After drying time (couple hours) 

3 or more coats of clear sealer topcoat. 

I couldn't be more pleased. 

I finally decided to just paint that shelf. I might go back and do the granite.

I have enough left over.

The finished product turned out beautifully if I do say so myself.